Related topics

Linux 2.4.22-pre10-ac1
Pair of Samsung SP1614C 2 platter SATA drives - non raid .2. NF7-S v2.0 with EQuito's D22 BIOS Si3112 v4.2.47 .3. WinXPPro-SP1 The Samsung's are on SATA0 -where do I get the driver -which Si3112 the v4.2.47 or v4.2.27 Basically all you need to do is have a bootable HDD on the SATA and you have done it. not so

NF7-S Raid Problems
Alan Cox a...@lxorguk.ukuu.org.uk linux kernel The ATI chipset serial ATA is an SI3112 cell. While this is supported by the sata layer (you'll need to grep by id because naughty Mr Garzik doesn't use the PCI ID defines) the sata layer driver still gives some users real problems. Alan diff -u --new-file --recursive

6.1-RELEASE: TIMEOUT - WRITE_DMA retrying
... WRITE_DMA retrying (1 retry left) LBA=70938623 Under steady IO load it panics, that started when we changed SATA controller (FreeBSD detects it as SiI 3512). I had similar problems under 5.x and 6.x with a SI3112. My testing and investigations back then suggested that some combinations of hardware and the

SATA hard drives
Newer motherboards also support SATA-300, so you will want drives in that speed too (most 300 GB and larger are available in SATA-300. ..... I saw some discussions about how crappy Si3112 and low-end Adaptec controllers are, but is there any way to have it running stable on 6.0/6.1RC machine?

Only one CD/RW drive can be set to record
... Mikael Pettersson) o Fix error paths in AD1889 for leaks (Francois Romieu) o Further cciss updates (Mike Miller) o ServeRAID updates (Jack Hammer) o Iptables updates (Harald Welte) o TFTP nat update (Harald Welte) Linux 2.4.22-rc2-ac1 o Add hwif->sata to fix cable issues with SI3112 (me) Linux 2.4.22-rc1-ac1 o

Boot disk and system disk on different hard drives
Those 4 are working fine, but the fifth bay was intended to be used for backup and is running off an Addonics EI PCI host controller (based on the SI3112 SATA controller). When inserting a drive, the safe removal icon does not come up in the systray, but when I remove the drive I get the "Unsafe Removal of Device"

8INXP : Blue screen on XP install
SATA: CD-ROM:\other\sil\si3112\*.* Tim "Steve" <st...@here.com> wrote in message news:3ec62249$0$45180$65c69314@mercury.nildram.net... I forgot to mention, Win 2000 also does the same thing when I try and install that direct to my SATA drive. I'd be interested to hear if anyone else has had the same problems with

Linux 2.4.21-rc5-ac2
A bit more reading around suggests that the timeout issue is strongly related to my SI3112 SATA controller so I'm thinking of changing it; can anyone please recommend an SATA controller they're using which hasn't given them any problems? (Even better if they have Maxtor drives hanging off it!

GA8KNXP: installed latest Si3112 driver & now cannot boot from ...
Tomas Szepe sz...@pinerecords.com lucky linux kernel [a...@redhat.com] Linux 2.4.22-rc2-ac1 o Add hwif->sata to fix cable issues with SI3112 (me) depmod: *** Unresolved symbols in /var/tmp/.build-8601/install/lib/modules/2.4. 22-rc2-ac1/kernel/drivers/ide/ide-core.o depmod: ide_wait_hwif_ready depmod:

SATA & NF7-s - anyone give me a walkthrough ? - Sorted now !
I just wanted to stop in and say that I got my system up and running/booting from the Seagate SATA drive, it was a pain. I found a later version of the Satalink drivers on the Gigabyte website so I downloaded those. Unzip the drivers somewhere and copy the contents of the si3112 directory to a floppy, you will need

Raid problems (Abit NF7-S2G)
Just purchased two Western Digital 36.5GB Raptor hard drives (2x WD360JB 10000rpm, SATA, 8mb cach) with the intention of putting them on rade 0 (striping) saved the changes, cleared the disks .. now onto setting up windows 2k .. so booted from cd rom hit F6 selected the Si3112 Win 2k driver .. got to the Disk

Linux 2.4.21rc1-ac4
... microsoft public windowsxp perform_maintain Hello, I have two drives capable of writing to CDs, a Memorex CD/RW and a Plextor SATA, CD, DVD/RW drive. ..... Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) Company : Microsoft Corporation Driver : si3112 Description : Serial ATA miniport driver Version : 1, 2,

Only one CD/RW drive can be set to record
ABIT nf-7s Si3112 2-port sata controller on MoBo Si3114r 4-portRaid PCI controller WD800JB as IDE drive Maxtor 6Y250MO sata drive Anyone have any suggestions? If I understand you correctly then your system looks like this: Drive C: - boot drive, otherwise unused. Drive D: - WinXP Drive C: - System drive,

SATA controller - Adaptec 1210SA on 6.0/6.1RC
The SATA stuff is still being actively worked on. Major changes happened between SUSE 9.2 and SUSE 9.3. Thanks Chris, think I'll hold off for awhile on changing to SATA and see what happens in the next year. PT I have an ASUS A7N8X Deluxe MB with the SI3112 onboard SATA/RAID chip. It works flawlessly with SUSE

Problems with software RAID on SATA
+ * + * If you are using WD drives with SATA bridges you must set the + * drive to "Single". "Master" will hang + * + * If you have strange problems with + * @dev: PCI device we are describing + * @index: Controller number + * + * Print the basic information for the state of the CMD680/SI3112 + * channel.

Linux 2.4.21rc6-ac1
I have only the one hard drive, PATA, using the converter to connect to the SATA port. What is your boot sequence? SATA - CD drive - floppy Can't really own separate driver (don't remember if it was newer or not) but decided to stick with the SI3112 driver that's included in nVidia's unified driver package.

Hot Swapping a SATA drive in Windows 2000 and XP.
... Cox wrote: some nforce boards that have problems with SI3112 at least See the nForce & SI680 notes on the silicon image website Thanks, didn't see anything there about nforce. Along the way I observed improvement by turning off usb, onboard eth, onboard audio, serial, parallel, onboard sata(haven't tried).

Linux 2.4.21rc2-ac3
I'm not having any of the issues you describe. But here are a few suggestions. You might want to check the SATA cable connections, possibly swap it for another cable. I have an Intel D845PEBT2 mobo with the SI3112 SATA controller built in. I installed a Seagate 120gig SATA drive, and performed a fresh install.

SATA & NF7-s - anyone give me a walkthrough ?
I should point out that I'm typing this on a machine that's using a SI3112 controller for it's only hard disk, without problems... http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ata/ From what I have seen, this puppy currently has a strangle-hold on the bottom of the list of desirable SATA controllers.

Linux 2.4.21-rc4-ac1
Jason Ash m0ng0lh0...@netscape.net alt comp periphs mainboard gigabyte Bj <bji...@iquest.net> waxed eloquent in news:a9d4b$4230d968$cb10d67$2726 @allthenewsgroups.com: I'm trying to setup a SATA drive on this mobo. I'm using Windows 2000 Pro. I made a disk with the si3112 info and used that with the F6 option.